This is the first in what will be a long series of posts about Scotland’s North Coast 500 — an epic and memorable road trip (though I’d better write about it before I forget about it!) This post consists of an introduction and some tips and resources for trip planning. Future posts will comprise stops along the route and some other places in Scotland.
All of our cookie cutters are “handmade” items. Or, rather, they are made in our home studio on a 3D printer. We use PLA made of food-grade materials for most of our cookie cutters (actually, all of them at this point — but there’s a chance we might try PETG for some in the future). To keep your cookie cutter (and you) happy and healthy, please comply with the following instructions:
We do minimal post-processing on our cookie cutters — enough to remove strings or obvious bumps, but we do not sand them extensively as it makes no difference in your cookie and is difficult to do on something with as many nooks and crannies as a detailed cookie cutter.
We used to offer our cookie cutters coated with food-safe epoxy resin as an extra for a shinier finish and to fill in some of the inevitable 3D printing gaps — but it was more time and trouble than it was worth and a PLA manufacturer said, “we literally know of nobody who is doing that.” However, if you want to coat your cookie cutter with epoxy, we recommend Alumilite Amazing Clear Cast as it is what we use — it is food safe if cured properly and easy to mix and use.
